J13W-16P，J13W-25P，J13W-32P，J13W-40P，J13W-64P，J13W-100P，J13W-160P，J13W-250P，J13W-200P，J13W-320P，J13W-420P，J13W-16R，J13W-25R，J13W-32R，J13W-40R，J13W-64R，J13W-100R，J13W-160R，J13W-250R，J13W-200R，J13W-320R，J13W-420R，J13H-16，J13H-25，J13H-32，J13H-40，J13H-64，J13H-100，J13H-160，J13H-250，J13H-200，J13H-320，J13H-420，J13H-16P，J13H-25P，J13H-32P，J13H-40P，J13H-64P，J13H-100P，J13H-160P，J13H-250P，J13H-200P，J13H-320P，J13H-420P，J13H-16C，J13H-25C，J13H-32C，J13H-40C，J13H-64C，J13H-100C，J13H-160C，J13H-250C，J13H-200C，J13H-320C，J13H-420C，J13W/H-G1/4，J13W/H-G3/8，J13W/H-G1/2，J13W/H-G3/4，J13W/H-G1，J13H-G1/4，J13H-G3/8，J13H-G1/2，J13H-G3/4，J13H-G1，DN3，DN4，DN5，DN6，DN8，DN10，DN15，DN20，DN25，DN32，NPT1/4，NPT1/2，NPT3/4，NPT3/8，NPT1。
一、J13W/H-NPT1/4 NPT1/2 NPT3/8内螺纹丝口截止阀产品特性：
1.制造标准：ASME B16.34-2004
2.连接形式：内螺纹连接(NPT,G,Rc,Rp…)
3.结构特征：锥面密封
4.阀门检验与试验：API 598-1996
5.公称压力：≤10000Psi
6.适用工作温度：-29℃～+538℃
7.适用介质：水，油，气等腐蚀性与非腐蚀性介质
8.公称通径：DN3~50mm
二、J13W/H-NPT1/4 NPT1/2 NPT3/8内螺纹丝口截止阀主要零件材料：
序号 NO. | 零件名称 Part name | 材质 Material |
1 | 阀体Body | 20# A105 SS304 SS304L SS316 SS316L |
2 | 阀盖垫片Bonnet Gasket | 紫铜(Red copper) PTFE |
3 | 阀盖Bonnet | 20# A105 SS304 SS304L SS316 SS316L |
4 | 填料垫Packing Seat | PTFE柔性石墨(Expanded Graphite) 金属盘根(Matel and Graphite) |
5 | 填料Packing | PTFE柔性石墨(Expanded Graphite) |
6 | 填料压盖Packing Gland | 20# A105 SS304 SS304L SS316 SS316L |
7 | 阀杆Stem | 20# A105 SS304 SS304L SS316 SS316L |
8 | 手柄Handle | 20# A105 SS304 SS304L SS316 SS316L |
9 | 内六角螺钉Hexagon Screw | 20# A105 SS304 SS304L SS316 SS316L |
三、J13W/H-NPT1/4 NPT1/2 NPT3/8内螺纹丝口截止阀主要结构连接尺寸：
ITEM NO. | 公称通径DN Nominal bore | Td | H | L | L1 | N |
J13W-1 | DN6 | NPT1/4 | 75 | 58 | 75 | 60 |
J13W-2 | G1/4 | 85 | 58 | - | 60 |
J13W-3 | DN10 | NPT3/8 | 75 | 58 | 78 | 60 |
J13W-4 | G3/8 | 87 | 58 | - | 60 |
J13W-5 | DN15 | NPT1/2 | 77 | 68 | 86 | 60 |
J13W-6 | G1/2 | 87 | 60 | - | 60 |
J13W-7 | DN20 | G3/4 | 100 | 70 | - | 60 |
J13W-8 | DN25 | Rc1(Rp1) | 110 | 78 | - | 60 |
J13W-9 | DN32 | G1-1/4 | 130 | 102 | - | 60 |
以上信息仅供参考，详情请与我司相关人员确认。
